Make में Subscriby सिनेरियो चलाएँ
145 इवेंट में से किसी के लिए भी एक वेबहुक लिसनर और हर रीड व राइट के लिए HTTP मॉड्यूल, बाकी सब जैसे ही टोकन और स्पेसिफ़िकेशन पर
Make has no native Subscriby app, and it does not need one: its custom webhook listener takes any of the 145 signed events, and its HTTP modules call every read and write on the REST API from the published OpenAPI spec. The guide gives you the listener setup, the signature check as a short JavaScript module, and the HTTP module settings, so a scenario that starts from a new member and ends with a coupon or a broadcast is a few modules long.
- इनबाउंड
- कस्टम वेबहुक लिसनर
- लिसनर बनाएँ, उसका पता Subscriby में वेबहुक एंडपॉइंट के रूप में चिपकाएँ, इवेंट चुनें; हर डिलीवरी हस्ताक्षरित आती है।
- आउटबाउंड
- OpenAPI स्पेसिफ़िकेशन पर HTTP मॉड्यूल
- 30 रिसोर्स परिवारों में हर रीड और राइट, ऐसे पर्सनल एक्सेस टोकन से कॉल की जाती है जिसका दायरा आप तय करते हैं।
- सिग्नेचर जाँच
- एक छोटा मॉड्यूल
- गाइड HMAC सत्यापन को एक सर्वरलेस JavaScript मॉड्यूल के रूप में देती है जिसे आप एक बार चिपकाकर हर सिनेरियो में फिर से इस्तेमाल करते हैं।
- पुनः प्रयास
- लगभग 4 दिनों में 8 प्रयास
- बंद लिसनर से इवेंट खोता नहीं: Subscriby बढ़ती सीढ़ी पर पुनः प्रयास करता है और हर प्रयास लॉग करता है।
- साइन-इन
- एक पर्सनल एक्सेस टोकन
- 107 क्षमताओं में से कौन-सी टोकन में होंगी, यह आप चुनते हैं; केवल पढ़ने वाला सिनेरियो कभी लिखने का अधिकार नहीं रखता।
- इस प्लान में शामिल
- हर प्लान, Free सहित
- API और वेबहुक किसी भी प्लान पर कोई अतिरिक्त शुल्क नहीं लेते; Make आपसे Make का शुल्क लेता है।
What Make gives you
No app to wait for
The listener and the HTTP module are built into Make, so there is nothing to install, approve or update; the OpenAPI spec tells the module every field.
Every event, signed
Any of the 145 events can start a scenario, and the signature module proves each delivery came from Subscriby before the scenario acts on it.
Every read and write
Anything the dashboard can do, an HTTP module can do, with the same token abilities; add an idempotency key header to a write and a re-run scenario never creates a duplicate.
Switch later without loss
A scenario built on the raw API and webhooks moves to Zapier, n8n or your own code unchanged in substance, because they all use the same two doors.
How to connect
- 1
Create a scenario in Make and add a Webhooks, Custom webhook listener at the top; copy its address.
- 2
In Subscriby, add a webhook endpoint with that address, pick the events, save, and copy the endpoint secret.
- 3
Paste the signature module from the guide into the scenario and give it the secret, so unsigned deliveries stop there.
- 4
Create a personal access token with the abilities the scenario needs, under Settings, API tokens.
- 5
Add HTTP modules for the reads and writes you need, with the token as a bearer header and the fields from the OpenAPI spec.
सबसे उपयुक्त
- Teams already on Make
- Scenarios that mix Subscriby with a dozen other apps
- Anyone who prefers built-in modules to yet another app
अक्सर इसके साथ जोड़ा जाता है
वे इंटीग्रेशन जो क्रिएटर इसके साथ जोड़ते हैं।
सामान्य प्रश्न
गाइड पढ़ेंक्या कोई नेटिव Make ऐप है?
नहीं, और ज़रूरत भी नहीं: कस्टम वेबहुक लिसनर और HTTP मॉड्यूल Make में बिल्ट-इन हैं और हर इवेंट और हर एंडपॉइंट को कवर करते हैं। गाइड में सटीक सेटिंग हैं।
मैं कैसे सत्यापित करूँ कि डिलीवरी Subscriby से आई है?
हर डिलीवरी में टाइमस्टैम्प और बॉडी पर एक HMAC सिग्नेचर हेडर होता है। गाइड जाँच को Make के लिए छोटे JavaScript मॉड्यूल के रूप में देती है; बेमेल का मतलब है कि सिनेरियो रुक जाना चाहिए।
अगर इवेंट के समय मेरा सिनेरियो बंद हो तो?
Subscriby विफल डिलीवरी को लगभग 4 दिनों में 8 बार तक बढ़ती सीढ़ी पर फिर से आज़माता है, और डिलीवरी लॉग हर प्रयास दिखाता है; लिसनर वापस आने पर इवेंट पहुँच जाता है।
मैं कौन-सा टोकन इस्तेमाल करूँ?
Subscriby में केवल उन्हीं क्षमताओं के साथ बनाया गया पर्सनल एक्सेस टोकन जिनकी सिनेरियो को ज़रूरत है, 107 में से, HTTP मॉड्यूल से bearer हेडर के रूप में भेजा गया।
क्या इसका अतिरिक्त शुल्क है?
नहीं। API और वेबहुक Free सहित हर प्लान पर हैं; आपका Make प्लान आपका अपना है।
मुफ़्त शुरू करें — आज अपना पहला सिनेरियो बनाएँ
फ्री प्लान में 3 प्रोजेक्ट शामिल हैं। कोई मासिक शुल्क नहीं — लेनदेन शुल्क के लिए कार्ड की जानकारी आवश्यक है।
30 मिनट में निःशुल्क सेटअप करें